The thermal load test device for rock wool for thermal insulation is a test equipment developed according to the technical conditions specified in the national standard of the People’s Republic of China GB/T11835-2007 “Rock wool, slag wool and its products”, and meets the requirements of the thermal load shrinkage temperature test method in GBT 5480-2017 “Test Method for Mineral Wool and Its Products”. 【Relevant Standards】

2.GB/T11835-2007 Rock wool, slag wool and their products for thermal insulation 3. GBT 5480-2017 Test Methods for Mineral Wool and Its Products 4.ISO1716-2002 Reaction of building products to flame test Determination of heat of combustion

【Scope of application】: The thermal load test device for rock wool for thermal insulation is a test equipment developed according to the technical conditions specified in the national standard of the People’s Republic of China GB/T11835-2007 “Rock wool, slag wool and its products”, and meets the requirements of the thermal load shrinkage temperature test method in GBT 5480-2017 “Test Method for Mineral Wool and Its Products”. 1. [Compliance with standards]:                              2. GB/T11835-2007 Rock wool, slag wool and their products for thermal insulation 3. GBT 5480-2017 “Test Methods for Mineral Wool and Its Products” 4.ISO1716-2002 Reaction of building products to flame test Determination of heat of combustion [Instrument features]:   The product has a reasonable structure, touch screen control, high degree of automation, accurate recording time, stable performance and easy operation, data can be stored in the touch screen, and historical data can be accessed.  【Technical Parameters】: 1. Seven-inch full-color touch screen control, multi-point program heating; 2. Ambient temperature: room temperature ~40°C relative humidity: ≤75% 3. Working voltage: AC 220V±10V 50Hz 4. Total power: 2.5KW Heating power: 1000W 5. Zoom measurement range: room temperature ~900°C 6. Heating rate: room temperature ~400°C, 5°C/min, 400~800°C, 3°C/min 7. The instrument adopts a single-chip computer and multi-point program for heating up 8. Fixture: stainless steel material; Corrosion resistant 9. The heat source of the instrument adopts hot plate type 10. Specimen: 490pa pressure 11. Test cylinder: 48mm±1mm 12. Equipment weight: 50 kg 13. Touch Display: (1) Size: 7 inches Effective display size Length 15.5cm Width 8.6cm; (2) Resolution: 800*480 (3) Communication interface RS232, 3.3V CMOS or TTL, serial port mode (4) Storage capacity: 1G (5) Pure hardware FPGA driver display, “zero” startup time, can be run on power (6) Adopting M3 + FPGA architecture, M3 is responsible for instruction parsing, and FPGA focuses on TFT display (7) The main controller adopts a low-energy processor and automatically enters the energy-saving mode