The Luer joint comprehensive performance tester is suitable for detecting the comprehensive performance of 6% Luer standard joints, including liquid leakage, air leakage, separation force, stress cracking, unscrewing torque, overload resistance, etc., and the product also meets the requirements of ISO80369 test items. The instrument fixture is easy and fast to operate, and the positioning is accurate. The equipment is widely used in medical device manufacturers, various quality inspection institutes, third-party testing institutions, colleges and universities, scientific research institutes and other units. The product adopts a high-rigidity slide structure to ensure the axial operation and positioning accuracy, and the clamp adopts the structure of automatic centering before and after, which only needs to be adjusted up and down to align the center, which is simple and fast, and the clamping efficiency is far better than that of ordinary clamps. 【Relevant Standards】

GBT 11962.1-2015 Syringes, needles and other medical devices – 6% (luer) tapered fittings – Part 1: General requirements, GBT 1962.2-2001 Syringes, needles and other medical devices – 6% (luer) tapered fittings – Part 2: Locking fittings

【Scope of application】: The Luer joint comprehensive performance tester is suitable for detecting the comprehensive performance of 6% Luer standard joints, including liquid leakage, air leakage, separation force, stress cracking, unscrewing torque, overload resistance, etc., and the product also meets the requirements of ISO80369 test items. The instrument fixture is easy and fast to operate, and the positioning is accurate. The equipment is widely used in medical device manufacturers, various quality inspection institutes, third-party testing institutions, colleges and universities, scientific research institutes and other units. The product adopts a high-rigidity slide structure to ensure the axial operation and positioning accuracy, and the clamp adopts the structure of automatic centering before and after, which only needs to be adjusted up and down to align the center, which is simple and fast, and the clamping efficiency is far better than that of ordinary clamps. [Meet the standard]: GBT 11962.1-2015 Syringes, needles and other medical devices – 6% (luer) tapered fittings – Part 1: General requirements, GBT 1962.2-2001 Syringes, needles and other medical devices – 6% (luer) tapered fittings – Part 2: Locking fittings [Instrument features]: 1. Intelligent embedded operating system, humanized interface design, what you see is what you get; 2. 7-inch color LCD screen, high-definition display effect; 3. The test stop is equipped with high-quality metal buttons, which is more convenient and fast to use; 4. High-precision stepper motor controls the spindle rotational movement, silent operation, and smooth transmission; 5. High-precision linear guide rail structure to ensure the horizontal movement accuracy of the moving slide table and improve the accuracy of test results; 6. Equipped with high-precision tensile force sensor, accurately perceive axial force, accurate to 0.3%; 7. Set up torsion angle monitoring, which can increase the basis for torque test judgment; 8. Standard configuration of micro printer, printing various test results and other test data at any time; 9. Standard RS232 data communication interface, configuring professional software can facilitate data export and external connection; 10. Meet the requirements of the new version of GMP, the system has ISP online upgrade function, and can be upgraded and updated remotely; 【Technical Parameters】: 1. Test items: stress cracking, anti-overload sliding wire test, anti-axial load separation, anti-twisting torque separation, leakage, air leakage and other GB1962 items; 2. Axial force range: 0.1~100N; 3. Axial force accuracy: resolution 0.01N, accuracy 0.03%FS; 4. Torque sensor range: 0~1N.m; 5. Torque measurement accuracy: resolution 0.0001Nm, accuracy 0.03%; 6. Test pressure range: -100kPa~600kPa, 7. Test pressure accuracy: accuracy 0.25%FS, resolution 0.1kPa; 8. Holding time: 1~999999s, accuracy 0.02 seconds; 9. Specimen type: various 6% conical joints; Fixtures can be customized; 10. Overall dimensions: 680mm(L)×450mm(D)×360mm(H) 11. Power supply: 220VAC, 50Hz 12. Net weight: 36kg 【Product Configuration】: Standard configuration: main unit, 1 piece of standard fixture, standard luer connector, power cord, etc.; Optional parts: standard joints, test fixtures;