YS-CFT-10 Catheter Flow Tester

YS-CFT-10 Catheter Flow Tester

【Scope of application】
The main function of the catheter flow tester is to test the flow rate of the needle tube, under a specific pressure, the flow flow through the catheter represents its unobstructed performance, and the test results are compared with the theoretical flow rate, and its flow rate can be obtained whether it is qualified. This product is easy to operate, with automatic water filling function, stable pressure control, and the equipment adopts a special structure to make the outlet pressure consistent with the set pressure, so that the test results are more accurate. Catheter flow tester is suitable for detecting conventional intravascular catheters, non-intravascular catheters, disposable sterile urinary catheters, disposable infusion sets, peritoneal dialysis tubes and other medical catheters, products are widely used in medical device product manufacturers, quality inspection institutes, third-party testing institutions, colleges and universities, scientific research institutes and other units. 【Relevant Standards】
    GB T 15812 1-2005 Appendix E, YY0325-2022 Appendix F, YY0285.1-2017 Appendix E, GB 8368-2018.
【Scope of application】: The main function of the catheter flow tester is to test the flow rate of the needle tube, under a specific pressure, the flow flow through the catheter represents its unobstructed performance, and the test results are compared with the theoretical flow rate, and its flow rate can be obtained whether it is qualified. This product is easy to operate, with automatic water filling function, stable pressure control, and the equipment adopts a special structure to make the outlet pressure consistent with the set pressure, so that the test results are more accurate. Catheter flow tester is suitable for detecting conventional intravascular catheters, non-intravascular catheters, disposable sterile urinary catheters, disposable infusion sets, peritoneal dialysis tubes and other medical catheters, products are widely used in medical device product manufacturers, quality inspection institutes, third-party testing institutions, colleges and universities, scientific research institutes and other units. [Meet the standard]: GB T 15812 1-2005 Appendix E, YY0325-2022 Appendix F, YY0285.1-2017 Appendix E, GB 8368-2018. [Instrument features]: 1. Intelligent embedded operating system, intelligent temperature control, stable accuracy; 2. Built-in circulation pump, automatic water addition, automatic drainage, easy to use; 3. Built-in stainless steel constant temperature water bath, metal shell for safety protection, neat and beautiful appearance; 4. The liquid level height can be adjusted freely to ensure the accuracy of pressure output. 5. Equipped with special connectors to adapt to various medical catheters; 【Technical Parameters】: 1. Liquid flow rate range: 0~600ml/min; 2. Temperature control range: room temperature -100°C; 3. Temperature control accuracy: ±1°C; 4. Liquid level height: 200mm~1200mm (liquid level height adjustable); Static horizontal height: 1000±5 mm; The water pump circulates automatically; 5. Time controller: error ±1S; 6. Internal material: stainless steel; 7. Test interface: interface type: medical silicone tube + pagoda connector; 8. Power source: 220V 50Hz; 9. Overall dimensions: 900mm(L)×500mm(D)×1680mm(H); 10. Net weight: 46kg; 11. Flow calculation: graduated cylinder method measurement; 12. Water pump flow rate: 6L/min, adjustable; 13. External circulation device: the water in the constant temperature water tank is circulated to the customer’s other devices, and then circulated to the water tank; 14. Water tank volume: ≥5L. 【Product Configuration】: Standard configuration: main unit, constant temperature sink, pipeline, etc.; Options: Custom joint clamps;

Related products