【Scope of application】
It is used to test, evaluate and grade the dynamic transfer performance of liquid water in fabrics; The identification of the unique water resistance, water repellency and water absorption of the fabric structure is the basis, including the geometric structure of the fabric, the internal structure and the wicking characteristics of the fabric fiber and yarn.
【Relevant Standards】
AATCC195-2011, SN1689, GBT 21655.2-2019 and other standards.
【Scope of application】:
It is used to test, evaluate and grade the dynamic transfer performance of liquid water in fabrics; The identification of the unique water resistance, water repellency and water absorption of the fabric structure is the basis, including the geometric structure of the fabric, the internal structure and the wicking characteristics of the fabric fiber and yarn.
【Meet the standards】：
AATCC195-2011, SN1689, GBT 21655.2-2019 and other standards.
【Product features:】：
1. The instrument is equipped with advanced motor control device, which is precise and stable control.
2. Advanced droplet injection system, accurate and stable droplets, with liquid recovery function, to prevent salt water crystallization and blocking of the pipeline.
3. It adopts high-quality gold-plated probes, which have high sensitivity, oxidation resistance and good stability.
4. Color touch screen display control, Chinese and English interface, menu operation mode.
【Technical parameters】：
1. Test data: microcomputer control, bottom wetting time, surface wetting time, maximum moisture absorption speed of the bottom layer, maximum moisture absorption speed of the surface layer, maximum moisture absorption radius of the bottom layer, maximum moisture absorption radius of the surface layer, diffusion rate of moisture in the bottom layer, diffusion speed of water on the surface, cumulative single flow direction transfer capacity, and overall liquid moisture management ability.
2. Liquid conductivity: 16ms±0.2ms;
3. Test liquid delivery volume: 0.2±0.01g (or 0.22ml), diameter in the test liquid tube 0.5mm;
4. Upper and lower sensors: 7 test rings, spacing between each ring: 5mm±0.05mm;
5. Test ring: composed of probe; Upper probe diameter: 1.54mm±0.02mm, lower probe diameter: 1.2mm±0.02mm;
6. Test time: 120s, water inlet time: 20s;
7. The pressure of the test head < 4.65N±0.05N (475gf±5gf), and the data acquisition frequency > 10hz;
8. One-click start test, click to start the motor automatically drive the test head to the specified position, built-in pressure detection device, automatically stop after fixed pressure, start the test, and automatically return after the test is over;
9. Equipped with a droplet injection system, the drop is accurate and stable, and the pumpback system can be rotated in reverse to pump the remaining brine in the infusion tube back to the water storage tank to prevent brine crystallization and blocking the pipeline.
10. Power supply: AC 220V, 50Hz, power: 0.4KW;
11. Weight: 30kg;
【Configuration checklist】：
1. 1 main unit
2. 1 piece of conductive rubber
3. 1 product certificate
4. 1 copy of the product instruction manual
5. 1 delivery note
6. 1 acceptance form
7. 1 copy of the product album
