It is used for uniform extrusion in the laboratory to remove excess water from the fabric, completely simulating the process of rolling and dyeing on site. 【Relevant Standards】

Not at the moment

[Scope of application】： It is used for uniform extrusion in the laboratory to remove excess water from the fabric, completely simulating the process of rolling and dyeing on site. [Instrument features]: 1. Combining the advantages of general infrared colorizer and traditional glycerin colorizer, a new constant temperature and heating curve thread sequence is adopted, and the dyeing efficiency is higher. 2. Special self-help agent addition structure, suitable for all kinds of powder, liquid, true constant temperature additives. 3. It can provide various fiber color testing with a bath ratio of 1:5~30 and 5~50g. 4. With special dyeing cup accessories, it can accelerate fiber absorption, dye evenly without color, and at the same time, the dyeing yarn will not form balls after dyeing, and the dyeing cloth surface will be flat. 5. Install programmable intelligent computer, multiple expression methods, and monitor the working status of the laboratory in real time. 6. Using electric heating tubes for heating, no oil fume pollution, no glycerin loss, small power, and heat preservation, good constant temperature effect, and can save huge glycerin and power supply costs. 7. The control of the frequency converter, the automatic forward and reverse rotation device and the adjustable rotary rotation speed can better cooperate with the movement mode of the on-site mass cargo process, so that the liquid in the cup fluctuates back and forth when rotating, so that the dyeing liquid output rate is more uniform, suitable for various raw material dyeing, and the most flat and uniformly dyed samples can be obtained. 8. In order to adapt to various fabrics and dyeing processing methods, we use 200ml, 350ml, 500ml and 800ml dyeing cups as dyeing with low and large bath ratios. 【Technical Parameters】: 1. Temperature control range: room temperature ~140°C; 2. Temperature control accuracy: ±0.5°C; 3. Heating rate: 0.2~4°C/min 4. Cooling method: forced air cooling; 5. Heating medium: thermal oil; 6. Movement speed: 0.2~60 times; 7. Test cup specifications: 800ml, 500ml, 350ml, 200ml (optional); 8. Test cup material: 316 stainless steel, one-time stretch molding; 9. Power source: AC380V 50HZ; 10. Power: 5.5KW; 11. Overall dimensions: 800×500×1300mm; 12. Net weight: 130kg.