The low-temperature cold resistance tester is specially designed to test the requirements of various low-temperature environments such as shoe upper leather, finished shoes, rubber, soles, synthetic leather, plastic finished shoes, etc., so as to understand the ability of various materials or finished shoes to adapt to the situation of low temperature climate or cold terrain areas. 【Relevant Standards】

ASTM D 1790,D 1593,1052,JIS K6545,EN ISO20344,HG/T24I I,HG/T287I,GB/T2099I,CNS 7705, QB/T2224, QB/T 1471.DIN 53351，Adidas GE-24, Adidas GE-57, SATRA Tm92 , SATRA TM 161

【Scope of application】: The low-temperature cold resistance tester is specially designed to test the requirements of various low-temperature environments such as shoe upper leather, finished shoes, rubber, soles, synthetic leather, plastic finished shoes, etc., so as to understand the ability of various materials or finished shoes to adapt to the situation of low temperature climate or cold terrain areas. [Meet the standard]: ASTM D 1790,D 1593,1052,JIS K6545,EN ISO20344,HG/T24I I,HG/T287I,GB/T2099I,CNS 7705, QB/T2224, QB/T 1471.DIN 53351，Adidas GE-24, Adidas GE-57, SATRA Tm92 , SATRA TM 161 【Technical Parameters】: 1. Inner and outer box material: stainless steel #304 2. Controller: Japanese Omron controller 3. Temperature range: a. normal temperature ~-30°C, b. Normal temperature ~-60°C 4. Optional inner box action: A. Upper material low-temperature flexion fixture: 1. Number of sets: 6 pieces 2. Test frequency: 1.5±0.1HZ 3. V-shaped angle of the fixture: 40°±1° 4. The radius of curvature of the V-shaped tip of the clamp is 6.4mm 5. The maximum distance of the two fixtures: 28.5±1.0mm 6. The closest distance between the two clamps: 9.5±1.5mm B. Upper material low temperature flexing fixture: 1. Number of sets: 4 2. Test frequency: 100±5 times/min 3. Flexion angle: 22.5°±0.5° 5. Protection device: thermal protection shutdown, leakage protection shutdown, over-temperature protection, overload protection and other functions 6. Control accuracy: ±0.5°C, 7. Distribution uniformity: ±2°C, 8. Cooling speed: a. It takes about 45 minutes to reach -30 °C at room temperature b. It takes about 60 minutes to reach -60 °C at room temperature 9. Refrigerant: R404 environmentally friendly refrigerant 10. Compressor: Taikang, France 11. Compressor start delay: 5min 12. Power consumption: 4KW 13. Insulation materials: hard foam and glass wool 14. Counter: LCD, 0~999,999 adjustable 15. Window: (210×35×270)mm, two-grid vacuum layer 16. Window light: P1 light, 5W 17. Power supply: AC380V50Hz 18. Motor: Beltless multi-imported geared motor 19. Inner box size: (60×60×55) cm 20. Volume: (110×105×160)cm 21. Weight: about 420kg