The test specimen is placed under a circular cutting wheel equipped with a counter and subjected to a certain pressure, and the anti-cut ability of special protective gloves is evaluated by the rotation of the circular cutting wheel and the movement of the test specimen. Test the cutting resistance of standard protective gloves such as EN388 and shoe uppers; 【Relevant Standards】

EN388-2016, GB/T20991-2007, ISO20344-2004 and other standards GB/T17622-2008 “Insulated Gloves for Live Work” AQ6102-2007 “Acid and Alkali Resistant Gloves” GB24541-2009 “Hand Protection Mechanical Hazard Protection Gloves” GA614-2006 “Police Cut-resistant Gloves”

【Scope of application】: The anti-cut ability of special protective gloves is evaluated by placing the test specimen under a circular cuttering wheel equipped with a counter and subjected to a certain pressure, by rotating the circular cutting wheel and moving the test specimen. Test EN388 and other standard protective gloves and shoe uppers and other cutting resistance tests; [Meet the standard]: EN388-2016, GB/T20991-2007, ISO20344-2004 and other standards GB/T17622-2008 “Insulated Gloves for Live Operations” AQ6102-2007 “Acid and Alkali Resistant Gloves” GB24541-2009 “Hand Protective Mechanical Hazard Protective Gloves” GA614-2006 “Cut-resistant gloves for police” [Instrument features]: 1. Color PLC integrated display control box, menu mode operation; 2. No swing in the radial direction, no running and vibration phenomenon; 3. Precision high-grade motor drive, smooth operation, low noise; 4. Jogging adjustment, automatic reset of the tool holder; 5. Special tungsten steel hardness blade, standard friction head weight; 6. Replaceable type, specimen table, multi-stage position test; 7. Induction detection control, automatic stop of cutting and penetrating instruments; 【Technical Parameters】: 1. Add to blade load: (5±0.5) N. 2. Movement stroke: 50mm. 3. Cutting speed: The maximum sinusoidal cutting speed is up to 8±2cm/s. 4. Blade requirements: round blade diameter (45±0.5) mm, thickness (0.3±0.03) mm 5. Total cutting angle 30 degrees-35 degrees: The blade should be tungsten steel with (700-720) HV hardness. 6. Specimen size: 100×60mm 7. Counting range: 0-999999 8. Volume: 580×160×430mm. 9. Weight: 60kg. 10. Power supply: AC220V, 10A.