It is an advanced prototype made of digestion and transformation on the basis of absorbing the same small rolling mill from abroad and combining the current situation of domestic rolling and dyeing post-treatment technology. 【Relevant Standards】

Not at the moment

【Scope of application】: It is an advanced prototype made of digestion and transformation on the basis of absorbing the same small rolling mill from abroad and combining the current situation of domestic rolling and dyeing post-treatment technology. [Instrument features]: 1. The pressure can be adjusted arbitrarily within 0.03~0.6MPa (about 0.3kg/cm2~6kg/cm2), and the rolling residue rate can be selected according to the process requirements. 2. The roll working surface is 420mm, which is suitable for the detection of the effect of small batches and multi-variety dyed fabrics. 3. Large-section membrane cylinder, strong anti-friction resistance of the guide rail, automatic reset when power is off, no left and right deviation, high reproducibility. 4. The roll is made of high-precision butadiene rubber, with a length of 420mm, a diameter of ¢130mm, and a hardness of 70° on the Shore scale 5. Safety protection system, once the action is made, the roll stops rotation and automatically resets. 6. 2 sets of pressure regulating valves and solenoid valves. Equipped with a flushing system. 【Technical Parameters】: 1. The whole machine is made of SUS304 plate. 2. Roll pressure: 0.03-0.6Mpa. 3. Frequency conversion speed regulation 0-18 rpm. The speed can be adjusted arbitrarily. 4. Voltage input 220V, 50HZ. 5. Fixed speed 0-10 rpm. The voltage input is 380V, 50HZ. 6. Overall dimensions: vertical: 890×630×1300mm. Horizontal: 850×680×1100mm. 7. Weight: 90kg